Saturday, March 22, 2014
HIDE FULL DRIVE PARTITION
- First of all logged into administrative account.
- Click on start, open run and type “CMD” and press enter.
- Type “diskpart” and press enter.
- After few seconds diskpart utility will appear.
- Now type “list volume” to show list of volume and press enter.
- Select the Drive or volume that you want to hide. If you have four drives C,D,E,F, and you want to hid “D” drive, then type “select volume 1” and press enter.
- Now in the next step type "remove letter D" to hide this drive.
- Close CMD and open My computer to check…drive D is not there…
- Now if you want to show the hidden drive then in step 7 type “assign drive d” and check “My computer”. Drive is back now.
- Excellent trick, try it now.
 | |
| image (hide system drive) |
Monday, March 17, 2014
What is drive testing in Telecom Procedure of drive testing
- Drive Route and Site Data for the sites to be driven is taken from customer
- Drive Test LOG File of the specified Drive Route / Site is saved and the same will be handed over to customer at the end of the day
- Drive Test Resource identify routine field optimization issues like cable swapping, missing neighbors etc., and rectify the same with the help of the customer.
This way mobile phone companies can decide how to improve their network coverage in a certain geographical area.
 |
Normally it is conducted in a car, with one driver and one or two drive testing engineers checking the data and navigating the driver to the right direction if necessary. These drive testing engineers first reach to the tower location and make physical optimization by inspecting issues like cable swapping, improper hardware, alarms, antenna tilting (machenical and electrical), antenna orientation.After field or physical optimization he starts drive testing by his vehicle. Drive testing engineer collects network data by making a lot of calls (short and long). The data collected includes data for serving cell as well as the neighbours.This data collected helps us to find and analyze the problems in the network.
Drive Test performance measurements are carried out for the following reasons:
- Test the network from the subscribers point of view
- Test the complete system, end to end
- Benchmark performance against competitor networks
- Test specific important routes and areas
- Test in-building coverage for specific buildings(Metro, Airport, office etc.) called walk test.
- Vehicle
- Drive test mobile phone (e.g Ericsson TEMS)
- Dongle (network inspection USB)
- External vehicle mounted GPS
- Laptop with drive test software and GPS connection capability and data cables, multi-connector port etc.
- TEMS Investigation
- Agilent E6474A
- Neptune
- CDMA Air Interface Tester (CAIT)
- TEMS DeskCat
- Actix Analyze
Here i am suggesting some precautions for beginners in drive testing -
- Before starting your drive test, Collect all your equipment like GPS, Dongle, Data cables, laptop etc. You should check your kit properly working and properly setup. Also check site data, mapinfo etc. should be installed on your system.
- Make sure all USBs are properly attached and must not be loose, otherwise it will create problem while drive testing
- At physical optimization time, you should have proper safety measures.
- First analyze the problem, then start driving to optimize the network problem.
- Dont forget to play and save logfile before starting drive testing.
Tags: how to drive test in telecom, software used in telecom RF drive testing, tools used in drive testing, kit of drive testing, procedure of drive testing, RF drive testing, TEMS software in drive testing, steps of drive testing, what is the network data collected in RF drive testing
Saturday, March 15, 2014
HIDE FULL DRIVE PARTITION
First of all logged into administrative account.
Click on start, open run and type “CMD” and press enter.
Type “diskpart” and press enter.
After few seconds diskpart utility will appear.
Now type “list volume” to show list of volume and press enter.
Select the Drive or volume that you want to hide. If you have four drives C,D,E,F, and you want to hid “D” drive, then type “select volume 1” and press enter.
Now in the next step type "remove letter D" to hide this drive.
Close CMD and open My computer to check…drive D is not there…
Now if you want to show the hidden drive then in step 7 type “assign drive d” and check “My computer”. Drive is back now.
Excellent trick, try it now.
Tuesday, March 11, 2014
Tips For Resolving Hard Drive Failure
After a computer failure, hard drive recovery is still a possibility. When it happens, it is typically completely unexpected and unwanted. A buzzing or ticking sound which indicates that the hard drive is failing may be the only thing to indicate what has just happened, and that all of the data on a hard drive has been lost completely. Because most of us keep quite a bit of important information on our computers, data hard drive recovery has become an important industry. The recovery process is an essential task performed by quite a few technicians in computer shops.
There are two ways it can become damaged: internally or externally. Physical failure or external damage can occur as the result of fluctuations in power or heavy impact on the unit. Internal damage is most often caused when software is corrupted, when bad file structure exists or when the hard drive has been attacked by a virus. Internal damage is also called logical failure. Both logical failure and physical failure can be rectified by a technician who knows his stuff; in many cases, data can be successfully recovered.
When a problem occurs, the nature of it must be deciphered before the recovery process can begin. Scandisk can be run to see what is going on with the hard drive; it will scan the hard drive and look for damaged parts. Some programs can even determine whether there has been physical damage to the unit. Data can usually be drawn out by such programs, with the data from the damaged sectors being copied to an undamaged locale. There are many types of data recovery software programs available, with some being much more high-end than others. They can help computer owners recover any lost data without ever having to take the hard drive to a computer technician.
Physical damage can be a complicated matter to resolve – even those software recovery programs which detect it will not be able to completely settle the matter. It is best to seek expert advice when this sort of damage occurs. A professional will be able to go over the damaged hard drive and determine how much of the data can be recovered. The kind of technology necessary to recover data from a damaged physical hard drive is not the sort that many will have at home so taking a hard drive in to a computer facility will be your best bet for recovery. For example, technicians may use magnetometers to extract fragments of damage and attempt to rebuild the data that had previously existed on the drive.
Because many of us depend upon computers to earn an income, this type of failure can be particularly daunting. But as previously mentioned, both types of failures can be remedied, though to what extent depends upon the damage done. In order to ensure the best possible outcome, take it in to see a professional at the first opportunity. You do not want to make the problem worse before it can be made better.
Sunday, March 2, 2014
How To Drive Traffic To Your Website With Facebook Images
) used to put posts links there only to update the fan page.But do you think, only updating the page will help you to succeed in your goal of getting traffic from facebook? If you think yes, then sorry to hurt your feelings. This is not the job done. You have to learn some facebook marketing skills that can bring more ways to increase website traffic.
Increase Visitors To Your Blog
Without taking your too much time, let’s directly come to the topic. In one of my earlier posts about getting traffic from Google Plus, I mentioned that how posting images is helpful to attract wider audience. This concept works everywhere either you are sharing images on Google plus, facebook or any other platform where you can share your stuffs.You just need to post such images on your facebook fan page for which you can get decent shares. Let’s see how posting images will help you to get visitors to your website.
Step-by-Step Tutorial
Below are some easy to follow steps that we need to take in action. Follow them and see how easily you can learn how to get more website traffic.- Select an image that relates to your niche. Funny or humor related images works great.
- Post them on your facebook fan page by writing up a cool description.
- Remember: Not to put any link there. It’s not the correct time to promote links
- Try to get maximum shares, likes and comments on that post as much as possible. Do everything that you can do to promote that image. Ask your friends to share it and leave a comment. This way you can get maximum shares. The maximum shares you get, the chances will higher to get more traffic to your blog.
- Once you get enough shares, it’s time to play for our own benefit. Simply click on the image and choose Edit from the right side options.
- Now smartly add your blog post link in the description that highly relates to that image. (Matching post will give you more traffic) and press Done Editing button.
- After saving the changes, your link will start appearing to each person’s timeline who had shared your image. That means, now your link will also appear to their friends and chances are higher to get more readers. (Free promotion)
Points to be Take Care
- You need maximum shares on your images to get maximum benefit of this trick.
- Don’t put non-related links. Less number of people will click that link.
- Please don’t do spamming. Make use of this trick for good purpose.
- Most Important: Enjoy free promotion
Final Words!
There are a lot of ways that you can use to drive visitors to your website from social media sites. You just need to figure out those ways, make strategies, apply them and get results.
Saturday, February 1, 2014
Buffalo Introduces Drive Station CX Series in India
Buffalo Inc., a provider of networking, storage and memory solutions, has recently introduced its Drive Station CX series in India.The Drive Station CX series it provides maximum security for the data and is with Full Disk Encryption. With plug-and-play installation, a configuration wizard and eco power management, this Drive Station is easy to use and manage.
SecureLockManager Easy can remember a users password on his/her computer and log them on automatically. TurboUSB Performance of the Buffalo Drive Station CX series helps in faster data transfer rates.No drivers are needed for the Drive Station
New Power Savings Mode makes it very Earth friendly. Memeo AutoBackup for Windows and Macintosh helps one to backup valued data. The Auto Power feature helps in driving the power on and off with ones system. The Cross-Platform Support helped to connect to the USB on any PC or Mac.
The company offers a three-year warranty for the Buffalo Drive Station CX series.The available capacities and price details in India are:
HD-CX500U2 (500 GB) - Rs. 9,000/-
HD-CX1.0TU2 (1 TB) - Rs. 13,000/-
HD-CX1.5TU2 (1.5 TB) - Rs. 21,000/-
HD-CX2.0TU2 (2 TB) - Rs. 40,000/-
Tags:-Buffalo Introduces Drive Station CX Series in India,Buffalo Drive Station CX series price,Buffalo Drive Station CX series price in india,Buffalo Drive Station CX series available models,Buffalo Drive Station CX series capacities,Buffalo Drive Station CX series details,Buffalo Drive Station CX series specs
Saturday, January 18, 2014
HP V 250 W 8 GB Pen Drive Price in India
