BOB SHARE

The steps are as follows:

Front panel generally consists of 4 Plug the cord, namely:
1. LED lights hard drive (HDD LED)
2. The Power LED (POWER LED)
3. Reset button (RESET SW)
4. Power Button (POWER SW)
   
Description:
For instructions on wiring the front panel, theres usually at Motehrboardnya Manual, because every motherboard definitely different. But, for now almost all mainbord use the same standard in peletekan Pin-pin.
Cables Front Panel consists of 10 pins. So the five pin under all the odd-numbered, from left to right numbered 1-3-5-7-9. While the pins on the top row of the even-numbered 2-4-6-8-10. Empty pin is Pin 10.

Here are the mounting Structure Cabling Front Panel:
1-3 to the HDD LED cable
2-4 To Cable POWER LED
Cables To RESET SW 5-7
6-8 To Cable POWER SW
Medium Pin 9 is left empty

Description:
Pin 1, 2 and 6 are connected to the positive wire, only 5 pin number associated with the negative cable. In contrast, in the right column only pin number 7 which is connected to the positive cable while the pin numbers 3, 4 and 8 are connected to the negative cable. It is easy to memorize, is not it? 1-3, 2-4, 5-7 and 6-8. Positive-negative, positive-negative, negative-positive, and positive-negative. Been discovered if only the pin numbers 5-7 are reversed from the other arrangement.
Then, how to find the positive and negative wires? To easily see the color. Negative cable mostly white or black. But if the white wire and the black to the white couple were negative. If there is no white or black cable will usually be red as the positive cable.